Wine stored at the wrong temperature can spoil — FETSCO repairs built-in and freestanding wine coolers, from single-zone units to large dual-zone cellars.
Likely cause: A failing compressor or thermoelectric cooling module, or a dirty condenser restricting airflow.
How we fix it — We test the cooling system and clean the condenser, repairing or replacing the failed component.
Likely cause: A faulty zone damper or a sensor reading incorrectly in one zone.
How we fix it — We test both zone sensors and the damper mechanism and replace whichever is at fault.
Likely cause: A dirty condenser coil, or the unit compensating for a refrigerant leak.
How we fix it — We clean the condenser and pressure-test the refrigerant circuit.
Likely cause: A worn door seal gasket, common on glass-door units exposed to room humidity.
How we fix it — We replace the door seal gasket.
Built-in wine coolers need front-venting confirmed clear; freestanding units need side/rear clearance — getting this wrong is a common cause of early failure.
Levelled so racking sits correctly and the door seals fully.
We allow the unit to reach and stabilise at the set temperature before confirming handover — this can take several hours on larger units.
Door seal and any humidity control feature checked and confirmed working.
Typically 12–18°C depending on the wine style and zone — we can help calibrate dual-zone units for reds and whites separately.
Yes — built-in installation with correct ventilation is part of our service.
Occasional light condensation can be normal; persistent condensation usually points to a door seal issue worth checking.
Compressors can usually be repaired or replaced on their own — we'll advise honestly if the unit's age makes replacement the better option.
Same-day slots available in most areas across the UAE.