Slow flow, odd-tasting water, or a unit that's stopped producing purified water altogether — FETSCO installs, services and repairs RO and other water purification systems.
Likely cause: A clogged pre-filter, a fouled RO membrane, or low inlet water pressure.
How we fix it — We replace the pre-filter and test membrane performance, replacing it if it's past its service life.
Likely cause: An exhausted carbon filter, or a storage tank that hasn't been sanitised in a while.
How we fix it — We replace the carbon filter and sanitise the storage tank as part of the same visit.
Likely cause: A loose fitting or a failed O-ring at a filter housing joint.
How we fix it — We identify and reseal or replace the specific fitting causing the leak.
Likely cause: A faulty float switch or pressure switch not signalling the tank is full.
How we fix it — We test and replace the float/pressure switch.
We test your inlet water pressure and quality to confirm the right system and filter stages for your water.
Unit mounted securely with all filter stages accessible for future servicing.
Inlet, drain, storage tank and dispensing tap all connected and pressure-tested for leaks.
New systems are flushed per manufacturer instructions before the first drinking-water test.
Pre-filters typically every 3–6 months and the membrane roughly every 12–24 months, depending on your water quality and usage — we can set up a reminder schedule as part of an AMC.
Yes — under-sink and wall-mounted installations are both routine for us.
Yes, including office and light-commercial RO systems.
Often just a filter due for replacement or low inlet pressure — worth a quick check before assuming a bigger fault.
Same-day slots available in most areas across the UAE.